G.fast (Ultrafast Fibre) & VDSL2 (Superfast Fibre) to Ethernet Modem Bridges DSL to your Router or Firewall Pre-Configured to work with most ISPs IPv6 and IPv4 Compatible Compatible with IPTV and Video on Demand (YouView Sky Q) 2 Gigabit LAN Ports Optional VigorCare Available
G.Fast & VDSL2 35b Capable Up to 330mbps download and 50mbps upload with G.Fast technology. Can be used with all the latest DSL standards with Vectoring and 35b SuperVectoring.
Two Gigabit LAN Ports Connect two devices to the Vigor 166 with 2 Gigabit (10/100/1000Mbps) LAN ports. No need to disconnect Ethernet WAN to check connectivity.
Add DSL connectivity to any Router Ideal Partner device for DrayTek dual-WAN products or any other vendor’s Ethernet WAN firewall. Reports DSL Line Status on DrayTek Vigor routers.
No Setup Needed Works as a modem with most ISPs straight out of the box. Pre Configured to work with most UK ISPs. Just set the username and password on your router.
Full-Bridge Modem and More Two operation modes for the Vigor 166 allow it to operate as a fully bridged DSL to Ethernet Modem or as a mini Router with NAT DMZ Host.
Wall or Shelf Mountable Can be installed securely on a wall or shelf with screw fixings to hold it in place. Mounting kit included.
Performance Max G.fast Sync Rate: 1.3Gb/s (dependent on ISP & Exchange equipment) Max VDSL2 35b Sync Rate: 300Mb/s Max VDSL2 17a Sync Rate: 100Mb/s Max ADSL2+ Sync Rate: 20Mb/s
NAT Performance: - Firewall: Up to 700Mb/s (940Mb/s with Hardware Acceleration) - NAT Sessions: 10 000
WAN Features Pre-Configured with OpenReach network VLAN tag 101 WAN1 Service & Customer (double-tag) VLAN support Maximum MTU 1508
G.Fast & DSL Compatibility BT Infinity Option 1 & Option 2 Compatible Compliant with Openreach SIN 527 & SIN 498 Auto Detection of G.Fast and VDSL line modes Support for G.INP & Vectoring G.Fast Standards: - ITU-T G.9700 G.9701 G.Fast - Profile: 106MHz VDSL Standards: - ITU-T G.993.1 VDSL - ITU-T G.993.2 G.997.1 VDSL2 - Band Plan: G.998 G.997 - Annex A Annex B Annex C - VDSL2 Profile: 8a 8b 8c 8d 12a 12b 17a 35b - OLR UPBO DPBO Supported - US0 Supported - Loop Diagnostic Mode - DSL Forum WT-114 ATM Protocols: - RFC-2684/RFC-1483 Multiple Protocol over AAL5 - RFC-2516 PPP over Ethernet - RFC-2364 PPP over AAL5 - Support for RFC4638 for MTU up to 1500
Network Features DSL Status Display with DrayTek Vigor routers
Management Interfaces Web-Based User Interface (HTTP / HTTPS) CLI ( Command Line Interface ) via Web Console Telnet or SSH Configuration Backup / Restore Firmware Upgrade via Web Interface TFTP
Router mode Firewall & NAT Features DMZ Host NAT Port Forwarding NAT Port Redirection ALG (Application Layer Gateway): SIP RTSP FTP H.323 VPN Pass-Through: PPTP L2TP IPsec Object-based IPv4 / IPv6 Firewall MAC Address Filter SPI ( Stateful Packet Inspection ) with FlowTrack Mechanism DoS / DDoS Protection IP Address Anti-spoofing Bind IP to MAC Address DHCP Server Static Route & IP Routed Subnet URL Keyword Filtering Dynamic DNS IGMP Proxy
Router mode WAN Protocols DHCP Client Static IP PPPoE / PPPoA IPv6: PPP DHCPv6 Static IPv6 TSPC AICCU 6rd 6in4 StaticTunnel Multi-PVC/VLAN virtual WAN interfaces for Management / IPTVservices
Router mode Management Features Syslog SNMP v2 & v3 VigorACS Management TR-069 TR-104 NTP Client Built-in Diagnostic Function (ping traceroute)
Operating Requirements Wall Mountable Operating Temperature : 0 °C ~ 45 °C Storage Temperature : -25 °C ~ 70 °C Humidity 10% ~ 90% (non-condensing) Power Consumption: 6.6 Watt Max. Dimensions: - Length: 181mm - Width: 125mm - Height: 40mm Weight: 280g Operating Power: DC 12V 1A (via external PSU supplied) Power Requirements : 220-240VAC
Security policy
Delivery policy
Return policy
